PU Primer 200

One component, transparent, polyurethane based primer designed for porous substrates.

Features & Advantages

  • Easy apllication
  • Quick dry time
  • Excellent adherence to many type substrates
  • with porous substrate
  • Perfect adherence to porous concrete.

Typical Application

  • Porous concrete
  • Plaster
  • Gypsum boards
  • Foundations and retaining walls

Concrete Substrate Standards

Hardness R28 = 15 Mpa
Humidity = < %5
Temperature = +5°C ile +30°C
Relative humidity = < %85
For information about other substrates, please contact with our technical department.

Surface Preparation

All surfaces must be free of oil, grease and moisture before the application. Clean the surface using a high pressure washer and remove oil, grease and wax contaminants, cement laitance, loose particles, mould release agents must be removed. Fill surface irregularities with the relevant product.

APPLICATION
Use a low speed mixer until a homogenous mixture is achieved for ready to use. It is applied without thinning. The whole surface should be primed. Airless spray is suggested for large areas application. After 2-4 hours,polyurethane coating or sealant is applied. The moisture of concrete should be max %5.

Cleaning of Tools

Tools are cleaned with suitable solvent after application. Rollers are single use only.

Packaging & Colors

Tools are cleaned with suitable solvent after application. Rollers are single use only.

4 Kg – 20 Kg Sealed Pails – Transparent color

Shelf Life

Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of +5 ˚C and +25 ˚C. Once opened, use as soon as possible.

Precaution

Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of +5 ˚C and +25 ˚C. Once opened, use as soon as possible.

Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks. Hands and eyes must be protected with gloves and protective glasses. In case of eye contact, rinse eyes with plenty of water for the material. During application ventilation should be done well. The MSDS (Material Safety Data Sheet) is available on request

Scroll to Top