PU 110 Aqua

One component, low viscosity, UV stable, PU dispersion based liquid waterproofing membrane. It produces a durable and highly elastic membrane curing with humidty.

Features & Advantages

  • Simple application
  • When applied forms seamless membrane without joints
  • It has excellent elongation properties
  • It has root resistant and it is certified for root resistant
  • Resistant to slack water and frost
  • Its low modulus gives to it excellent substrate crack-bridging properties
  • High water vapor permeability
  • It provides permanent elasticity up the -40 ˚C to +90 ˚C
  • Resistance in the cold: The film remains elastic even down to -40 ˚C, • Resistant to chemicals
  • It is used as a joint sealant
  • Elastomeric hydrophobic based
  • Excellent mechanical properties, high elongation, tensile and tear strength, high abrasion resistance.

Typical Application

  • Irrigation channels, Bridge platforms, Stadium tribunes, Gypsum and cement panels
  • Uncovered roofs
  • Internal and external application areas
  • Terraces, verandas and balconies
  • To protect the polyurethane foam insulation
  • Covered areas (wet areas, bathrooms)

Concrete Substrate Standards

 Hardness R28 = 15 Mpa
Humidity = <5%
Temperature = + 5 ° C to + 30 ° C
Relative Humidity = <85%
Please contact our technical department for primer options according to the surface condition. your consultant.

Surface Preparation

 Before applying oil, grease, paraffin wastes, cement from all surfaces. Splash, loose particles, mold release agents, cured old factors such as membranes and weakening adherence must be purified. By washing the surface with high pressure water, if possible. must be cleaned and dried; Surface irregularities with suitable products must be repaired.

LINING
Absorbent surfaces such as concrete, cement, flap and non-absorbent metal, Epoxy Primer WB on surfaces such as ceramic or old coatings

APPLICATION
The package is opened before use and mixed with a low-speed mixer. It should be mixed for 2 – 3 minutes. Pouring onto the primed surface and With the help of a roller or brush, at least two layers until the surface is covered must be applied. After the first coat is applied, minimum 12, maximum The second coat should be applied within 24 hours. Then second floor should be applied.

Cleaning of Tools

The tools used after the application should be cleaned with water. Rolls single is for use. It must not be used for the second time.

Packaging & Colors

The tools used after the application should be cleaned with water. Rolls single is for use. It must not be used for the second time.

 In 4 Kg – 20 Kg metal packages, in white and gray color on offer

Shelf Life

In its original unopened package, at a temperature between + 5 ° C and + 25 ° C. It can be stored for a maximum of 12 months. Drop material possible should be used as soon as possible

Precaution

In its original unopened package, at a temperature between + 5 ° C and + 25 ° C. It can be stored for a maximum of 12 months. Drop material possible should be used as soon as possible

Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks. Hands and eyes must be protected with gloves and protective glasses. In case of eye contact, rinse eyes with plenty of water for the material. During application ventilation should be done well. The MSDS (Material Safety Data Sheet) is available on request

Scroll to Top